Land Preparation & Tillage > Chisel Plows & Coulter Chisels
2433 3-Section Flexible Chisel Plows
  • Sunflower's Model 2433 tills deeply and evenly across the entire cutting width
  • Capable of handling deep chiseling and secondary tillage operations
  • Heavy 4" x 6" tubular steel tongue extends from the front-to-rear beneath the framework and is bolted to each bar, distributing stress across the entire frame 
  • Rephasing hydraulic lift system provides superior depth control 
  • Walking Tandems are available on all sections
  • Ratchet-jack hitch adjustment allows precise leveling of the frame from front-to-rear 
  • Choice of Rigid, Rigid-Shear Bolt or Spring Cushion Shanks
  • Safety light kit and SMV sign are standard equipment
2433 Three-Section Flexible Chisel Plows

MODEL NUMBER

2433-25'

2433-27'

2433-31'

2433-33'

2433-35'

2433-37'

2433-39'

2433-41'

NUMBER OF SECTIONS

3

3

3

3

3

3

3

3

ESTIMATED WT. (LBS.)

7,640

7,780

8,460

8,600

8,820

9,300

9,440

9,660

TRANSPORT HEIGHT

9' 10"

10' 6"

12' 8"

13' 4"

14' 4"

15' 7"

16' 3"

17' 3"

TRANSPORT WIDTH

18' 7"

18' 7"

18' 7"

18' 7"

18' 7"

18' 7"

18' 7"

18' 7"

NO. OF SHANKS-
CENTER FRAME

13

13

13

13

13

13

13

13

NO. OF SHANKS-
WING FRAME

6

7

9

10

11

12

13

14

NUMBER OF EXTENSIONS

0

1

0

1

2

0

1

2

NUMBER OF TIRES
PER CENTER FRAME

4

4

4

4

4

4

4

4

NUMBER OF TIRES
PER WING FRAME

2

2

2

2

2

2

2

2

ALL CHISELS HAVE A MAXIMUM DEPTH OF 12".

Horsepower requirements for chisel plows will vary greatly with the type of soil, moisture conditions, 
shape of sweeps and points, amount of surface trash, depth of tillage, speed, and many other related 
factors. Because of these many variables, the required horsepower cannot be predicted with any accuracy.

STANDARD EQUIPMENT (25' through 35' SIZES)

8     New 8 ply, 11L x 15 tubeless tires
8     15" x 10" six bolt wheels and hubs with 2" spindles and triple lip seals
4     Walking beams with greaseable tapered roller bearings
1     Fold kit assembly with 4" x 30" hydraulic cylinders and hose

STANDARD EQUIPMENT (37' through 41' SIZES)

8     New 8 ply, 11L x 15 tubeless tires
8     15" x 10" six bolt wheels and hubs with 2" spindles and triple lip seals
4     Walking beams with greaseable tapered roller bearings
1     Fold kit assembly with four 4" x 30" hydraulic cylinders and hose
2     Gauge wheels with 8 ply, 9.5L x 15 tubeless tires, 15" x 8" six bolt wheels and hubs with 1 3/4" spindles and triple
       lip seals

STANDARD EQUIPMENT (ALL SIZES)

2     4" x 8" and 3 3/4" x 8" hydraulic cylinders and hose
1     Single point front mounted depth control
1     Single lip hitch with 1 13/16" pin hole
1     Tongue jack
30" Clearance shanks on 12" centers
5/8" x 2" x 17" Reversible points
Warning light kit, complete with wiring to tractor
SMV Emblem

OPTIONAL EQUIPMENT

New 12 ply, 11L x 15 tubeless tires and 15" x 10" wheels instead of 8 ply,
11L x 15 tires and 15" x 10" wheels
Single tires on wings of
25' and 27' instead of walking tandems
Gauge wheels (25' through 35')
Rear tow hitch with 5' extension
Single lip hitch with 2 1/4" pin hole
Double lip hitch with 1 13/16" pin hole
5/8" x 2" x 17" Hardfaced reversible points
7/8" x 2" x 17" Reversible heavy duty points


 
Description
4411 Cutter Chisel

 

Options   Available in 8'6" and 11' models  
7, 9 and 11 shanks available
For One-Pass Fall Conservation Tillage
The 4411 Wil-Rich Cutter Chisel is an outstanding performer for conservation-minded farmers.  After harvest, slice through stalks and stubble and chisel compacted soil.  You can use this ruggedly built cutter chisel in various soil and crop conditions to preserve moisture and reduce wind and water erosion.

The cutter gang has 20" heavy gauge blades on 7.5" spacing that cut through stalks and residue.  Blades are mounted on 1.5" high strength gang shaft with triple lip sealed bearings.  A "C" spring flex-mounted bearing hanger protects the gang from rocks and other obstructions.

 

Specifications
Model Main Frame 8’6" 11’0"
Number of shanks 7 9 9 11
Overall Width 8’9" 11’3" 11’3" 13’9"
Expandable Yes No Yes No
No. of Cutter Blades 15 17 19 21
Walking Tandem Option N/A N/A Std. Std.
Shipping Wt. (approx.) 3685 4000 5462 5778
Shank spacing 15" Spacing
Tire Size 9:5L x 15" – 6 Ply – Optional
Bypass Hydraulic System Standard
Shovels Optional

sales@tricoprusa.com Tricorp USA | P.O. Box 2779 | Palm Beach, FL 33480 USA
phone:561-804-9909 | fax:561-804-9042 | email: sales@tricorpusa.com
Copyright © 2001