Land Preparation & Tillage > Disc Harrowers > Offset > Heavy


AMCO G-2 Wheel Offset Harrow

Heavy Primary Tillage with High Horsepower Tractors.

The best descriptions of AMCO's wheel offset harrow Model G-2 are dependable and rugged.

This offset harrow, which ranges in cutting width from 10'4" to 18'4" and weighs from 9,360 to 13,500 pounds, has 2-1/4" gang axles and 2-3/4" bore, greasable,triple lip sealed, toggle mounted ball type bearings with AMCO's exclusive Protect-O-Shield that features a two-year guarantee.

The Model G-2 has 32" x 5/16" blades with back-up blades on 12-1/2" spacing, extra heavy-duty moldboard type scrapers, and dual 15" x 10" high flotation wheels with 6-hole hubs.   It comes with its own tongue jack and gang bolt wrench as standard equipment.

The weight per blade on the G-2 ranges from 379 to 502 pounds, with the weight per foot ranging between 758 and 975 pounds.

Options include hydraulic controls and 32" x 3/8" thick cutout blades.

Dual Wheels for positive depth control

Dual wheels allow positive depth control and ease of between field movement with a heavy-duty 5" diameter rock-shaft pivoting on greasable pillow block bearings.

Heavy-Duty MoldBoard Scrapers

Heavy-duty moldboard scrapers keep blades free from debris.

Heavy-Duty Gang Bolt

Extra heavy-duty gang bolt with thread and nut cover assures problem-free hours of work.

Special Hydraulic Cylinder and Clevis

Big 5" x 16" x 2-1/2" hydraulic cylinder with special clevis lifts the harrow into transport position on dual wheels.  Special cylinder is highly recommended for the Model G-2.

Dual Leveling Springs

Dual leveling springs compensate automatically on changing ground conditions.

Protect-O-Shield Bearings

The G-2 has 2-3/4" bore, greasable, triple lip sealed toggle mounted ball type bearings with Protect-O-Shield.   AMCO guarantees these bearings for two years.

Reversible Clevis

The G-2 features reversible, ductile iron clevis.


Dial-A-Depth assures plowing at desired depth.

Model No. Cutting Width No.of Discs No. of Bearings Disc Size & Type Crawler Approximate Drawbar HP Required Rubber Tired Approximate Drawbar HP Required Approximate Weight


10'4"(3.15m) 20 8 32"(813mm)Cutout 100-120(75-89kW) 150-180(112-134kW) 9,360(4,246kg)
G-2-2432 12'4"(3.76m) 24 12 32"(813mm)Cutout 110-130(82-97kW) 160-195(119-145kW) 10,720(4,863kg)
G-2-2832 14'4"(4.37m) 28 12 32"(813mm)Cutout 120-150(89-112kW) 180-225(134-168kW) 11,430(5,185kg)
G-2-3232 16'4"(4.98m) 32 16 32"(813mm)Cutout 140-175(104-130kW) 210-270(157-201kW) 12,790(5,802kg)
G-2-3632 18'4"(5.59m) 36 16 32"(813mm)Cutout 160-200(119-149kW) 240-300(179-224kW) 13,500(6,124kg)

Specifications subject to change without notice. Tricorp USA | P.O. Box 2779 | Palm Beach, FL 33480 USA
phone:561-804-9909 | fax:561-804-9042 | email:
Copyright © 2001